When you have an appliance that’s not working properly, you probably feel pretty annoyed. After all, having a broken appliance can be incredibly inconvenient. You might have to spend time hunting for a screwdriver or wrapping up small children for the duration of the repair.
If your appliance isn’t working well enough to use frequently, you might even wonder if replacing the old one with a new version is worth the money. Fortunately, most people in Edmonton have little problem identifying what needs fixing and how to get started. Whether your broken appliance is something as simple as an ice maker that needs cleaning or something more complex such as a clothes dryer that won’t start up again, this article provides detailed instructions on Edmonton appliance repair.
Check for basic repairs.
If you’re certain that your appliance is broken, the first thing you should do is look to see if there’s a simple repair that might be able to get it back in working order again. Any simple things, like unclogging a drain line or getting rid of a calcium buildup in the condensate line of an ice machine, can often fix a broken appliance. If you accidentally knocked out the power to your entire house, consider turning off the breaker that controls that appliance. You might be surprised at how quickly a broken refrigerator can turn into a catastrophic disaster if it’s the only thing keeping the rest of your food cold!
Check for common issues.
If your appliance is broken enough to warrant a visit from the repairman, you might as well get him to take a quick look for common issues that could be causing the problem. Fixing these issues can often get your appliance back in working order again.
- Bad appliance seals – While appliances all come with seals that keep water and other contaminants out of the appliance inside, they all eventually get a bit gunked up with dust and grime. Sooner or later, all appliances need to have their seals cleaned. If your appliance is broken because of a bad seal, a quick cleaning will often get it running again.
- Loose or broken appliance connections – This is something that many homeowners don’t even realize is happening. When you’re turning on the lights and the power to your entire house, the hot and neutral wires running through your walls might be touching each other. If one of these wires comes loose where it touches your appliance, it can cause damage.
- Bad breaker – Though this could be something as simple as a fuse, it’s usually something that a simple trip to the breaker box can fix.
Keep your eyes open for more severe issues.
If your appliance is broken, you’ll want to keep an eye out for problems that might lead to more serious issues. This might be something as simple as an appliance that’s not getting enough water due to a problem with the water supply line or as complicated as a motor that’s worn out and requires replacement. If your appliance is broken and it doesn’t seem to be getting much better with time, it might be time to seek professional help. You don’t want to deal with a serious problem down the road that would have been completely avoidable if you’d just been a little more careful earlier.
Don’t forget to clean before you repair.
Before you head out to fix a broken appliance, ensure you’ve taken care of other basic housecleaning chores. It’s one thing to turn off the water that runs through your house, but it’s something else entirely to ensure that you’ve got a good system for collecting that water and putting it somewhere safe. If you’ve run out of hot water, it might be time to clean your water heater. You want to ensure that you don’t leave anything that would cause a clog in the system. If you don’t want to waste a bunch of water cleaning out your heater, you can ensure that you turn off your faucets before you do this. Cleaning your water heater might sound like a huge undertaking, but it’s one of those things that you can usually knock out in less than an hour.
Repairs with a service technician
If you’re determined to get your broken appliance back into working order, you might consider hiring a service technician to come out and look at it. This could save you a lot of time, especially if you don’t have much electrical knowledge. You’ve got a lot of options with service technicians: they can do the job for cheap or do it on-site at your house. You might get a lot of bang for your buck with one of these services: they might charge you a set amount for a service call but then come back to repair on-site at your house for a small fee.
Final Thoughts
A broken appliance can be a serious issue. It’s important to keep in mind, however, that most of these issues aren’t dangerous. If your appliance is broken, you’ve just got to check for common issues that might be causing the problem. You’ll quickly be able to identify the problem and get it fixed.
