Some clogs refuse to go away until you use a snaking device to remove them. A drain snake is a helpful device for many plumbers in Sacramento to get your drain flow back and remove that stubborn clog obstructing your drain. A drain snake is a spiral shape tool, and it is usually about 1/4-inch thick with a handle on one end. Blockages such as sink clogs, bathroom clogs, kitchen clogs, and toilet clogs are cleared using drain snakes. You can buy a 50 or 35-foot drain snake if you are in the market for purchasing a drain snake. These heights of drain snakes can remove most typical clogs.
Keep reading to know more about drain snaking and learn why it is an effective method:
When is a drain snake used?
Plumbers use drain snakes to tackle severe roots, grease, and serious clogs in drains and pipes. The winding part of this tool snatches the messy obstruction and pulls it out with it. Your plumber will repeat this process until the drain is clear from blockages or clogs.
A plumber will typically use this tool if you have a kitchen, bathroom, toilet, or sink clogged. Drain snakes are mainly used for smaller drains, while drain augers are designed to operate on large pipes. A Drain snake and drain auger are some of the best tools a plumber uses for drain cleaning in Seattle.
How it is used
A plumber will take a drain snake or plumber snake and press it against the clogged drain. Next, the blockage will be picked up, and the messy obstruction that was causing the clog will be cleared away.
The drain snake’s head is inserted into the affected drain, and then it is rotated to grab the blockages to pull it eventually.
Drain snaking is one of the effective drain cleaning methods that will give free-flowing drains. Here are the benefits you can reap if you have the following types of plumbing issues:
- Recurring clogs
- Slow drains
- Odors coming from drains
- Greasy clogs
How to use a drain snake yourself.
Using this is easy. You need to read the operating instructions mentioned by the dealer.
Here is the step-by-step process:
- Insert the coiled end of the snake into the drain opening.
- You have to keep inserting or pressing the snake until you feel the obstruction.
- Crankle the handle and apply more pressure to get a tight hold under the drain.
- Once you have done so, you will smack the snake on the surface of the obstruction as you slide on it.
- Rotate the drain snake against the obstruction. Rotating will help in getting the blockage attached. So, next, you have entangled the backup through the snake; it’s time to pull the snake out of the drain.
- That’s it. You have cleared the clog. Pour hot water into the drain to ensure no clog is left, as sometimes, the clog may get down the drain.
If you want a professional company’s help to clear your drain, you can hire an experienced drain cleaning and water heater repair Sacramento service to address your clogged drain issue.